Welcome to Machine House Pvt. Ltd.
AMT NEOPRENE MOUNT, SERIES N
AMT Series N neoprene mounts allow excellent attenuation of medium- to high-frequency vibration and noise generated from a wide range of motor-driven machines, particularly axial and centrifugal fans. Series N mounts are used to isolate a wide range of equipment and can be bolted to equipment mounting holes with the supplied cap screw and washer. However, it is not necessary to bolt these mountings to the floor on most installations. They can be used under flat bases that have no bolt holes in much the same manner as rubber pads. The mounting may be inverted so that the rectangular, rubber-covered steel base plate provides support over a large area.
Application
- Test rigs and special-purpose machines
- Rotary and multi-cylinder compressors
- Refrigeration plants and chillers
- Paper and printing machinery
- Axial and centrifugal fans
- Pumps and motors
- Gen-Sets
- Mills
| Description | UOM | AMT N-A30 | AMT N-A50 | AMT N-A60 | AMT N-A70 | AMT N-B70 | AMT N-C50 | AMT N-C70 |
|---|---|---|---|---|---|---|---|---|
| Min./Max. Load per mount | kg | 10–30 | 20–70 | 90–350 | 120–550 | 200–700 | 200–1000 | 500–2200 |
| Max. Static Deflection | mm | 7 | 7 | 13 | 13 | 13 | 8 | 8 |
Dimensional Data
| Description | UOM | N-A30 / N-A50 | N-A60 / N-A70 | N-B70 | N-C50 / N-C70 |
|---|---|---|---|---|---|
| L × W × H | mm | 80 × 45 × 40 | 140 × 85 × 70 | 165 × 100 × 75 | 190 × 130 × 65 |
| C | mm | 60 | 105 | 127 | 155 |
| T | mm | 6 | 7 | 7 | 7 |
| D | mm | 10 | 14 | 14 | 14 |
| B | mm | 40 | 65 | 76 | 110 |
| M | mm | M8 | M12 | M12 | M16 |
Advantages
- Economical, quick and easy to install.
- Reduces machine maintenance and cost..
- Prevents noise and high-frequency vibrations.
- Suitable as shock isolators for both active and passive vibrations.
- The bottom friction surface makes bolting unnecessary in most installations.
Looking for the right product?
